MySQL :: NDB 叢集內部結構 :: 2.68 DUMP 2506 (已過時)

NDB 叢集內部結構 / NDB 叢集管理用戶端 DUMP 命令 / DUMP 2506 (已過時)

2.68 DUMP 2506 (已過時)

注意

此 DUMP 命令在 NDB 7.4 及更新版本中不受支援。

程式碼: 2506
符號: TcDumpAllApiConnectRec
核心區塊: DBTC

描述. [未知]

範例輸出.

Node 2: TC: Dump all ApiConnectRecord - size: 12288
Node 2: Dbtc::ApiConnectRecord[1]: state=0, abortState=0, apiFailState=0
Node 2:  transid(0x0, 0x0), apiBref=0x1000002, scanRec=-256
Node 2:  ctcTimer=36057, apiTimer=0, counter=0, retcode=0, retsig=0
Node 2:  lqhkeyconfrec=0, lqhkeyreqrec=0, tckeyrec=0
Node 2:  next=-256
Node 2: Dbtc::ApiConnectRecord[2]: state=0, abortState=0, apiFailState=0
Node 2:  transid(0x0, 0x0), apiBref=0x1000002, scanRec=-256
Node 2:  ctcTimer=36057, apiTimer=0, counter=0, retcode=0, retsig=0
Node 2:  lqhkeyconfrec=0, lqhkeyreqrec=0, tckeyrec=0
Node 2:  next=-256
Node 2: Dbtc::ApiConnectRecord[3]: state=0, abortState=0, apiFailState=0
Node 2:  transid(0x0, 0x0), apiBref=0x1000002, scanRec=-256
Node 2:  ctcTimer=36057, apiTimer=0, counter=0, retcode=0, retsig=0
Node 2:  lqhkeyconfrec=0, lqhkeyreqrec=0, tckeyrec=0
Node 2:  next=-256

.
.
.

Node 2: Dbtc::ApiConnectRecord[12287]: state=7, abortState=0, apiFailState=0
Node 2:  transid(0x0, 0x0), apiBref=0xffffffff, scanRec=-256
Node 2:  ctcTimer=36308, apiTimer=0, counter=0, retcode=0, retsig=0
Node 2:  lqhkeyconfrec=0, lqhkeyreqrec=0, tckeyrec=0
Node 2:  next=-256
Node 2: Dbtc::ApiConnectRecord[12287]: state=7, abortState=0, apiFailState=0
Node 2:  transid(0x0, 0x0), apiBref=0xffffffff, scanRec=-256
Node 2:  ctcTimer=36308, apiTimer=0, counter=0, retcode=0, retsig=0
Node 2:  lqhkeyconfrec=0, lqhkeyreqrec=0, tckeyrec=0
Node 2:  next=-256

額外資訊. 如果使用預設設定，此命令的輸出很可能會超過最大日誌檔大小。